• Power Bags 1

    $1,399.00
    THIS LISTING IS FOR A SET OF 7" DOWN 14" BACK STRETCHED SADDLEBAGS AND REAR REPLACEMENT FENDER THESE COME WITH NO EXHAUST CUT OUT FIBERGLASS CONSTRUCTION PERFECT FOR USING YOUR STOCK HARLEY LIDS FACTORY HOLES ON SADDLEBAGS COME DRILLED FITS FACTORY HARDWARE/LATCHES {NOT INCLUDED} FITS FACTORY LIDS ABS OR FIBERGLASS (NOT INCLUDED) Fits 2014-2016 Touring MODEL HARLEY DAVIDSON Electra-Glide FLH/FLT Series Road King Ultra-Classic Street Glide and MORE
  • This set is made out of 100% hand laid fiberglass. It will come in a black primer. The tanks and dash are of durable quality. Normal prep work is needed before paint. Some modifications may be required for proper fitment. This set really gives your bike that custom look. Dash panel is only for Road King 08-13 Tanks will fit all touring models 08-14 Street Glide. Electra glide, Road Glide, etc Tanks will Fit Road King holes will need to be drilled.
  • This listing is for a set of  6.5" inch round speaker lids for Harley Davidson touring model motorcycles. These lids work well with stock or stretched saddlebags whether 4,5,6 or 8 inch bags. If your looking to add style and music to your bagger this is definitely the way to go.  Made using fiberglass Fits all touring models 97-2013
  • FITS: 09-13 FLH TOURING MODELS and 14 UP TOURING

    5.5" down 9" back Slope saddlebags without cutouts

    Bags are made from durable fiberglass material

     easy to work with incase of any mishap.

     Made to give your bike a lower look

    More storage space over factory

    Mounting holes drilled 

    "Harley Davidson aftermarket Fiberglass Part(s). Each part(s) come unfinished in black primer. pre fitment, prep work, sanding,filler is required prior to painting to remove any blemishes/scratches/ imperfections/Defects each part(s) may come with. Each part(s) varies in fiberglass thickness. Being that these parts are aftermarket modifications may be required for proper fitment. we recommend our products to be installed by a professional

    (PLEASE ALLOW UP TO 15-20 BUSINESS DAYS TO SHIP)

  • CAMARGO CUSTOM CYCLES TECH SUPPORT 352/600/2237 A SIMPLE WAY TO A BETTER RIDE, SINGLE OR DOUBLE Softail Air Suspension:  The worlds only internal Compressor Air Ride Suspension for Softails! SAS-00: fits H/D softail models 2000 to present. NEW AND IMPROVED SAS: Softail Air Suspension solves the problems with air rides & simplifies the install. You can raise and lower the bike at the touch of a button.  Add extra air to compensate for you passenger, then release some for solo riding. You can also release all the air and park your bike down on the ground.  Adjustable air pressure make for smooth comfortable ride under any condition.  No more bottoming out. FEATURES: • Built in compressor • Cylinder Pistons and Rods are doubled sealed • Pre set dampening • Easiest install on the market (no compressor to mount) • Only 4 switch wires and 4 bolts and the remote air breather to complete the install • Allows the full 4" of swing arm travel • Quick connect fitting with improved convenient breather line • No air lines to deal with or leak • The pneumatic cylinders eliminate bottoming out • All mechanical functions are protected in the durable CNC billet machined body • Remote filtered air breather keeps compressor clean and dry • All parts are CNC machined billet aluminum • The main body is hard anodized and warranted for life • Moving parts are oil-impregnated (permanent lubrication) • All parts are completely and easily re-buildable • CCCS offers a 3 year parts replacement warranty The Benefits of an SAS Air Shock: • Stay EPA Compliant on stock HD’s by not having to move canisters to make room for an ugly compressor. • The SAS has an easy operation.  Simply add air to increase firmness and release air to soften up the ride. • Machined 6061 billet aluminum housing that is hard anodized for longevity, and durable to protect all mechanical functions inside. • Pneumatic seals, and top quality O-rings are forever protected, and eliminate leaks. • Remote filtered air breather allows you to hide the air intake under your seat keeping the unit from ever pulling in contaminated air. • All Moving parts and bearings are permanently lubricated. • Adjustable air pressure from 0 to over 250 psi. Operation: The Simplified air suspension offers 3-4" of swing arm travel. At aprox. 150 psi the bike will be fully raised and the suspension will be resting on its piston bumpers at *maximum ride height*, after that your height will not change but you can continue to increase air pressure for improved riding during cornering or with a passenger.  The *maximum ride height* is adjustable during the installation. REMOTE FILTERED AIR BREATHER: This EXCLUSIVE feature ensures that your SAS stays contaminant free. Simply route the hose & filter away from road debris & water, then cut to length. Only from CCCS, Inc & the SAS. OVER SEAS SHIPPING EXTRA

    Softail Air Suspension: The Worlds only Internal Compressor Air Ride Suspension for softails!

  • THIS LISTING IS FOR A SET OF 6″ DOWN & 9″ BACK ANGLE CUT STRETCHED DOWN & OUT SADDLEBAGS AND REAR OVERLAY FENDER. THIS REAR FENDER IS MADE TO GO OVER YOUR EXISTING FENDER. MADE HERE IN THE USA USING QUALITY FIBERGLASS AND RESIN. THIS SET IS PERFECT IF YOUR LOOKING TO USE YOUR STOCK HARLEY LIDS WHICH WILL MOUNT ON WITH NO PROBLEM FACTORY HOLES ON SADDLEBAGS COME DRILLED FITS FACTORY HARDWARE/LATCHES {NOT INCLUDED} FITS FACTORY LIDS {ABS OR FIBERGLASS} THIS KIT COMES WITH NO EXHAUST CUT OUTS. Fits 96-13: Touring MODEL HARLEY DAVIDSON Electra-Glide FLH/FLT Series Road King Ultra-Classic Street Glide and MORE NORMAL PREP WORK AND MOCK UP IS REQUIRED PRIOR TO PAINTING
  • $1,550.00 THIS LISTING IS FOR A SET OF 7″ DOWN 14″ BACK STRETCHED SADDLEBAGS AND REAR REPLACEMENT FENDER PLEASE LET US KNOW IF USING A BACK REST SISSY BAR FOR A FENDER OR LAYOVER THESE COME WITH NO EXHAUST CUT OUT FIBERGLASS CONSTRUCTION PERFECT FOR USING YOUR STOCK HARLEY LIDS FACTORY HOLES ON SADDLEBAGS COME DRILLED FITS FACTORY HARDWARE/LATCHES {NOT INCLUDED} FITS FACTORY LIDS ABS OR FIBERGLASS (NOT INCLUDED) Fits 09-2013 Touring MODEL HARLEY DAVIDSON Electra-Glide FLH/FLT Series Road King Ultra-Classic Street Glide and MORE
  • $220.00

    This is a 23″ stretched front Fl style fender for Harley Davidson touring baggers. Made from fiberglass composites material hand laid. More durable then ABS plastic. This fender is designed to look like a stock front fender but stretched. Fits all touring models 89-13 Street glide Road glide Road king Electra glide Ultra classic Normal prep work is required prior to painting
  • CAMARGO CUSTOM CYCLES . COM
    352-600-2237
    THIS IS A SET OF  6" STRETCHED SIDE COVERS 
    THESE SIDE COVERS ARE A REPLACEMENT AND SNAP IN. " NO GLUING " FIBERGLASS CONSTRUCTED 
     FITS ALL TOURING MODELS FROM 09-13  ROAD KING STREET GLIDE ROAD GLIDE ELECTRA GLIDE ETC.
     
  • WELD IN SLIP FIT NECK AND TREES, TO FIT 2009-2013 AND UP 26" WHEEL $1,399.00 PRODUCT DESCRIPTION The new American Suspension Weld in Short Neck Kit lets you put a 26” wheel on your bagger and keep the long low look. The American Suspension Kit fits all 2009-2013 Harley Davidson Touring Models. The complete kit utilizes the same American Suspension geometry you have come to know and trust for precise handling. The neck allows clearance for 4 inches of suspension travel on a 26” wheel while keeping the neck height in stock location The steering geometry works perfect and the true trail is nearly identical to stock. The Short Neck uses oversize bearings and stem to retain strength. The Short Neck is machined from a solid block of steel using a sophisticated new manufacturing capability. The one piece billet steel look makes the Short Neck look like it would be right at home on an F-15. The Short Neck not only looks great, but eliminates all the manufacturing errors inherent in complex weldments. This is done to insure your project bike will handle great due to perfect steering geometry.
Go to Top